强效瓷砖背涂胶

产品简介 / PRODUCT INTRODUCTION

雨停强效瓷砖背涂胶采用德国巴斯夫主原料,精选多种进口助剂、填料研制而成，能在光滑的瓷砖表面牢固粘结，杜绝掉砖空鼓现象。

The YUTING super ceramic tile interface agent with German BASF, the main raw material,a variety of imported additives, packing to develop and become, can be bonded on the surface of theceramic tile that is smooth and firm, put an end to brick drum phenomenon.  

产品特点 / PRODUCT CHARACTERISTICS    

光滑瓷砖表面牢固粘结、不空鼓、不脱落；

旧瓷砖翻新无需砸砖，省工省料；

现代瓷砖背面蜡粉光

滑,背涂胶可渗透基层把砖体和水泥胶浆牢固粘结,起到优异的架桥作用;无机骨料,长效耐老化.

Smooth brick surface bonding, not empty drum, do not fall off; Old refurbished without having to

hit a brick ceramic tile, province work; Modern ceramic tile on the back of the wax powder is sm-

ooth, interface agent permeable brick and cement mortar at the grass roots level strong bonding

play a role of bridge; Mineral aggregate, long term aging resistance.  

适用范围 / SCOPE OF APPLICATION

用于大理石、玻化砖、文化石等粘贴前的界面处理。

瓷砖翻新前光滑面的拉毛处理。

Uesd for bonding interface treatment before marble, vitrified tiles, culture stones and so on. 

Ceramic tile is smooth surface roughening treatment before renovation.   

使用方法 / USING METHOD

基面处理→拌料方法

基层表面应坚实、无浮尘、无油污。

在涂刷前将玻化砖背面用湿布擦拭干净，去除饰面砖材背面的油污、防护剂、脱模剂等影响粘结的物质。如果是用在干燥墙体应先湿润基面。

先将液料倒入搅拌桶内，用电动搅拌器边搅拌边慢慢倒入粉料充分搅拌至均匀无粉粒、无沉淀的膏糊状。用毛刷或滚筒直接涂刷于处理好的基面(可使用较粗的毛刷以增强拉毛的效果)。

base processing→Method of useAt the grass - roots level surface should be solid, on dust, no pollution.First pour liquid into stirring barrels with electric mixer mixing while slowly pour into p-owder  fully mixing evenly without powder, paste of no precipitation. directly with brushor roller to handle good base(can use coarser brush in enhancing the effect of hair).

注意事项/ATTENTION

不能在0℃以下或淋雨施工，搅拌好的浆料应在2小时内用完。空气特别潮湿、不通风的地方，应采用通风设备加快防涂层干固。待2小时以上，涂层完全干固后方可进行下道施工工序。于雨停强力瓷砖胶配合贴砖达到完美效果,杜绝掉砖现象。

Not at 0℃ or in construction, good mixing of slurry shouls be finished within 2 hours .Theair is particularly wet and non ventilated place, should be used to speed up the waterprooflayer of ventinlation  equipment.for more than 2 hours , the coating is and completely dry andsolid before the constrction process can be carried out.

产品用量/PRODUCT USAGE

平整基面：(0.6-1)kg／m  (根据实况定量)

Smooth surface about (0.6-1) kg/m  (according to the situation).

保存方法/STORAGE METHOD

本产品应贮存于阴凉通风干燥处,未启封可保存两年.超期开盖后无异常仍可使用。

The product should be placed in a cool, ventilated, dry place and save for two years in sealed condition. No abnormal that the product was beyond the guarantee period can still use.

执行标准/EXECUTION STANDARD

JC/T547-2005

产品包装/RRODUCT PACKAGING

9kg/桶   5kg/barrel